Automation for double-leaf (swing) gates (2.5 m, up to 700 kg, full kit) ATHOS AC A25 AR

Electromechanical operator ATHOS AC A25 for swing (double-leaf) gates with a leaf weight of up to 700 kg and a leaf length of up to 2.5 m.

Recommended for classic inward opening installation. Stroke length: 300 mm.

Can be mounted on wide pillars with a depth of up to 165 mm from the edge of the pillar to the hinge (pivot axis). Maximum gate opening angle up to 110°.

⚠️ A central mechanical stop is strictly required to set the limit position for closed gates. Lateral stops for the open position are not required, as the telescopic drive completely retracts and stops internally (only in the case of classic inward opening).

⚠️ If the gate leaf exceeds 2.0 m in length, an EBP AC A 230V vertical electric lock must be installed to additionally secure the gate in the closed position and relieve wind load.

The ALENA SW2 (230V) control board in a CPEM box controls, by default, two operators (classic double-leaf gates) or one operator (single-leaf gates) — to set single-leaf mode, turn the T4 trimmer fully counterclockwise and save the new settings by holding the S2 button on the board for 5 seconds.

• Automatic timed closing function

• Remote control programming function within receiver range (DIP 1 – ON)

• Pedestrian mode function implemented via the 2nd receiver channel (programmed to the second remote button via S2)

• Manual release via triangular key in case of 230V power outage

• Fast-closing function after clearing the photocells (after 3 seconds)

• "Start" command block during the opening phase (ideal for collective/condominium use)

A unique development by the manufacturer — the proprietary BFT Easy Set app is a visualization calculator for precise installation geometry calculation of BFT swing gate automation. We recommend using this free installer assistant, available for download on Android and iOS app stores.

Kit Contents

• ATHOS AC A25 (230V) L (left) and ATHOS AC A25 (230V) R (right) operators — 2 pcs

• ALENA SW2 (230V) controller in CPEM box, with built-in 2-channel receiver (up to 63 remotes memory), DIP switches — 1 pc

• MITTO COOL C4 4-channel remote control, U-Security, 3V, 433.92 MHz — 2 pcs

• COMPACTA A20-180 photocells with swiveling lens, 12–33V AC/DC — 1 pair

• RADIUS LED AC A R0 230V yellow flashing light without antenna — 1 pc