Gate Automation

Deimos BT B400 electromechanical drive for sliding gates weighing up to 400 kg.

Features:

• Automatic gate closing

• Built-in 2-channel radio receiver for up to 63 users

• Remote control programming via radio channel

• Pedestrian mode ("Wicket" partial opening function)

• Manual release with a personalized key in case of power failure

• "Start" impulse lockout during the opening phase

• Soft start and slow-down upon stopping

• Compatible with the SL BAT2 emergency power supply module

• Certified to the ISO 9001:2008 European quality standard

• Obstacle detection feature

• 24V low power consumption technology

• D-Track patented BFT technology for automatic torque adjustment based on changing weather conditions

Kit Contents:

• Deimos BT A400 drive — 1 pc.

• Built-in control unit with mechanical limit switch — 1 pc.

• Built-in 2-channel receiver (up to 63 remotes) — 1 pc.

• MITTO COOL C4 4-channel remote control, U-Security, 3V, 433.92 MHz — 2 pcs.

Deimos ULTRA BT B600 KIT is a high-tech Italian BFT automation set for sliding gates with a leaf weight of up to 600 kg, a 24V motor power supply, and magnetic limit switches.

Designed for residential (private) use or for small shared entrances for up to 50 users.

The PRO control board allows you to configure any safety and control scenarios. Thanks to additional inputs/outputs, the automation system can be controlled directly from a smartphone using third-party devices, such as the AFT Dry Wi-Fi relay. If you purchase additional comfort with the SL BAT2 emergency power supply module (compatible with this model), you won't need to manually release the gate during power outages to drive in or out. For shared entrances, automatic opening and closing can be programmed during power cuts using the dedicated BATT CONFIG logic function, available out of the box on the MERAK BT A control board!

This is the updated 2025 model, replacing the previous DEIMOS ULTRA BT A600.

What's new in this model?

1. 30% increased speed — upgraded from 12 m/min to 14 m/min.

2. New low-power power supply unit with VERDE ®️ technology on BT models (stabilized 24V DC output across contacts 50-51-52 to power accessories).

3. Upgraded control board.

4. Dedicated slot for the EBT input/output expansion card on ULTRA models (sold separately).

5. Increased receiver memory — expanded from 63 to 128 remote controls.

6. Removable receiver memory module on ULTRA models for easy transfer of saved users to a new board, migration to another site, or expanding memory up to 2,048 remotes with the REM 2048 card.

7. U-Security ®️ technology integrated into the updated receivers, featuring encryption that makes copying BFT remotes impossible.

8. U-Link 2.0 ®️ technology with dedicated slots on the control board for B-EBA expansion cards (Wi-Fi, GSM, Bluetooth) to control the operator from a smartphone (EasyAXS app for installers, TaHoma by Somfy for end users).

9. D-Track ®️ technology — a smart dynamic torque management system with active obstacle detection.

10. Internal housing slot reserved for the SL BAT2 emergency battery backup module on BT models.

11. Integrated DIN rail for mounting accessories.

12. New rear ventilation grille.

13. Support for an optional heating element designed for extreme low-temperature conditions (new accessory).

14. 100% installation dimension compatibility with previous DEIMOS A models.

Package Includes:

Deimos AC B600 electromechanical operator for sliding gates weighing up to 600 kg

• Automatic closing

• Built-in 2-channel radio receiver (up to 63 users)

• Remote transmitter programming over-the-air

• Pedestrian mode ("wicket door" feature)

• Manual key release in case of power failure

• Fast closing upon photocell clearancea

• "Start" pulse lock during the opening cycle

Package Includes

ARES ULTRA BT B1000 KIT is a set of high-tech Italian BFT automation for sliding gates with a leaf weight of up to 1000 kg, 24V drive power supply technology, and magnetic limit switches.

Designed for industrial (collective) use in intensive mode with an increased operational lifespan compared to the residential series.

The PRO control board is designed for true professionals and allows you to configure any safety and automation control scenarios. Using additional inputs/outputs, you can control the automation from your phone via third-party devices (GSM module, WiFi relay, etc.), turn on courtyard lighting from the remote control, connect to complex fire safety systems, and implement many other use cases. If you purchase additional convenience in the form of the SL BAT2 emergency power supply module, which is compatible with this model, you won't have to manually unlock the gates during a power outage to drive in or out. For collective entrances, you can program automatic opening and closing of the gates while the power is out using the special BATT CONFIG logic function available on the MERAK BT A control board right out of the box!

Meanwhile, U-Security technology provides 100% security with two-way encryption for user remote controls, making them impossible to read or copy! Parking lot owners can be sure that unauthorized persons ("freeloaders") will not enter the territory through fraudulent remote copying schemes common with cheaper automation alternatives from other brands.

What technologies and features have appeared in the new model? Let's list them:

1. Increased speed by 30% from 9 to 12 m/min

2. New low-consumption power supply with VERDE ®️ technology in BT models (stabilized DC 24V on output terminals 50-51-52 for powering accessories)

3. Updated MERAK BT A control board

4. Slot for the EBT expansion card for control board inputs/outputs in ULTRA models (sold separately)

5. Increased receiver memory from 63 to 128 remote controls

6. Removable receiver memory in ULTRA models for easily transferring recorded users to a new board, moving to another location, or expanding the memory card up to 2048 REM 2048 remotes

7. U-Security ®️ technology in updated automation receivers, featuring encryption that makes it impossible to copy BFT remotes

8. U-Link 2.0 ®️ technology with special connectors on the control board for B-EBA WiFi, GSM, and Bluetooth expansion cards to control automation via smartphone (EasyAXS app for installers and TaHoma by Somfy for end users)

9. D-Track ®️ technology, an intelligent torque management and obstacle detection system

10. Dedicated space inside the housing for the SL BAT2 emergency power supply module

11. DIN rail for accessories

12. Added rear ventilation grille

13. Option to install additional heating for very low operating temperatures (new accessory)

14. 100% compatibility of mounting dimensions with previous ARES BT A models

Package Includes

Deimos BT B400 is a set of high-tech Italian BFT automation for sliding gates with a leaf weight of up to 400 kg, 24V drive power supply technology, and magnetic limit switches.

Designed for residential (private) use or small collective driveways for up to 20 users.

The PRO control board allows you to configure any safety and automation control scenarios. Using additional inputs/outputs, you can control the automation from your phone via third-party devices, such as the AFT Dry Wi-Fi relay. If you purchase additional convenience in the form of the SL BAT2 emergency power supply module, which is compatible with this model, you won't have to manually unlock the gates during a power outage to drive in or out. For collective driveways, you can program automatic opening and closing of the gates while the power is out using the special BATT CONFIG logic function available on the MERAK BT A control board right out of the box!

This is an updated 2025 model of the previous DEIMOS ULTRA BT A400 model.

What technologies and features have appeared in the new model? Let's list them:

1. Increased speed by 30% from 12 to 16 m/min

2. New low-consumption power supply with VERDE ®️ technology in BT models (stabilized DC 24V on output terminals 50-51-52 for powering accessories)

3. Updated control board

4. Slot for the EBT expansion card for control board inputs/outputs in ULTRA models (sold separately)

5. Increased receiver memory from 63 to 128 remote controls

6. Removable receiver memory in ULTRA models for easily transferring recorded users to a new board, moving to another location, or expanding the memory card up to 2048 REM 2048 remotes

7. U-Security ®️ technology in updated automation receivers, featuring encryption that makes it impossible to copy BFT remotes

8. U-Link 2.0 ®️ technology with special connectors on the control board for B-EBA WiFi, GSM, and Bluetooth expansion cards to control automation via smartphone (EasyAXS app for installers and TaHoma by Somfy for end users)

9. D-Track ®️ technology, an intelligent torque management and obstacle detection system

10. Dedicated space inside the housing for the SL BAT2 emergency power supply module in BT models

11. DIN rail for accessories

12. Added rear ventilation grille

13. Option to install additional heating for very low operating temperatures (new accessory)

14. 100% compatibility of mounting dimensions with previous DEIMOS A models

Package Includes

Deimos BT B600 electromechanical operator for sliding gates weighing up to 600 kg

• Automatic closing

• Built-in 2-channel radio receiver (up to 63 users)

• Remote transmitter programming over-the-air

• Pedestrian mode ("wicket door" feature)

• Manual key release in case of power failure

• Fast closing upon photocell clearancea

• "Start" pulse lock during the opening cycle

Package Includes

 ARES BT B1000 is a high-tech Italian BFT automation kit for sliding gates with a leaf weight of up to 1000 kg, featuring a 24V operator power supply technology and mechanical limit switches.

Package Includes

The ARES BT B1500 KIT is a high-tech Italian automated system by BFT designed for sliding gates with a leaf weight of up to 1,500 kg, featuring a 24V operator power supply and magnetic limit switches.

Engineered for intensive industrial (multi-user/collective) applications, it offers an extended operating lifespan compared to residential series.

The PRO control board is built for true professionals, allowing you to configure custom safety and automation management scenarios. With additional I/O terminals, you can control the system via third-party smartphone devices (GSM modules, Wi-Fi relays, etc.), turn on yard lighting using the remote control, integrate with complex fire safety systems, and implement many other scenarios. If you opt for the extra comfort of the SL BAT2 emergency power supply module compatible with this model, you won't need to manually unlock the gate during a power outage to enter or exit. For collective entrances, you can program automatic opening and closure during power outages using the special BATT CONFIG logic function, available out of the box on the MERAK BT A control board!

Moreover, U-Security technology delivers 100% secure two-way encryption for user remote controls, making them impossible to clone or copy! Parking lot owners can rest assured that unauthorized persons ("piggybackers") cannot breach the premises using remote-cloning scams common with cheaper alternatives from other brands.

What new technologies and features have been introduced in the new model?

Let's take a look:

1. 30% increased speed from 9 to 12 m/min.

2. New low-power supply unit featuring VERDE® technology in BT models (stabilized DC 24V on output terminals 50–51–52 for powering accessories).

3. Updated MERAK BT A control board.

4. Dedicated slot for the EBT I/O expansion card on ULTRA models (sold separately).

5. Expanded receiver memory from 63 to 128 remote controls.

6. Removable receiver memory in ULTRA models for easy transfer of recorded users to a new board, relocation to another site, or expanding memory capacity up to 2,000 remotes via the REM 2048 card.

7. U-Security® technology in updated automation receivers, providing encryption that makes copying a BFT remote impossible.

8. U-Link 2.0® technology with dedicated ports on the control board for B-EBA Wi-Fi, GSM, and Bluetooth expansion cards, enabling smartphone control (via the EasyAXS app for installers and Tahoma by Somfy for end users).

9. D-Track® technology, an intelligent torque management and obstacle detection system.

10. Internal housing compartment for the SL BAT2 emergency power module.

11. DIN rail for accessories.

12. New rear ventilation grille.

13. Optional heating kit support for extremely low operating temperatures (new accessory).

14. 100% mounting dimension compatibility with previous ARES BT A models.

Package

• Operator with magnetic limit switches and drive gear Z18 — 1 pc.

• Control board with LCD display ("MERAK ARES BT B1500" 24V) — 1 pc.

• 4-channel receiver with removable memory (up to 128 remote controls) — 1 pc.

• MITTO COOL C4 4-channel remote control (U-Security, 3V, 433.92 MHz) — 2 pcs.

The BFT ICARO SMART AC A2000 is an electromechanical operator for sliding gates weighing up to 2,000 kg, featuring a built-in control unit. It is a powerful, professional solution designed for automating large gates at industrial and commercial sites.

The ICARO SMART AC A2000 model ensures stable and controlled movement of heavy gates thanks to its advanced configuration options. The operator supports automatic closing, remote programming of transmitters via the radio channel, and two-button control for separate open and close commands. Flexible adjustment of force during opening, closing, and slowdown phases is available, along with adjustable slowdown speed. Built-in 3-step and 4-step control logics allow the system's operation to be adapted to various scenarios. The system automatically tests photocells before each cycle, supports disabling them during the opening phase, and issues a pre-movement warning signal before the gate starts moving, thereby enhancing operational safety.

Advantages

• Handles gates up to 2,000 kg

• Flexible force and speed adjustments

• Automatic safety system testing

• Remote control programming via radio channel

• Two-button control capability

• Pre-movement warning signal

• Multiple control logic modes

• Reliable performance under heavy workloads

Who Is It For?

• Industrial and warehouse facilities

• Commercial areas with large gates

• Users with gates up to 2,000 kg

• Those seeking powerful, professional-grade automation

Kit Contents

• ICARO SMART AC A2000 electromechanical operator — 1 pc.

• Built-in control unit with a mechanical limit switch — 1 pc.

• Built-in 2-channel receiver (up to 63 remotes) — 1 pc.

• 4-channel remote controls — 2 pcs.

PHOBOS BT B25 KIT swing gate automation kit for gates with a leaf weight up to 500 kg and length up to 3 m, equipped with the ZARA BT A80 control board with DIP switches.

Non-reversible, linear operator with a 330 mm rod stroke.

Recommended for standard inward-opening installations.

⚠️ Warning! If the leaf length exceeds 2 meters, installing an EBP BT A 24V vertical electric lock is mandatory to reduce wind load and provide additional locking in the closed position.

This is the updated 2024 model, replacing the PHOBOS BT A25 → now PHOBOS BT B25.

What’s new?

1. 🧲 Magnetic limit switches have been moved to the top of the housing for easier setup during installation. BFT's patented reverse haptic feedback (vibration) technology 📳 for limit switch triggering has been added, making the installation process even simpler.

   This increased the operator's rod stroke from 290 mm to 330 mm, allowing gate leaves to open up to 120° instead of the 116° offered by the previous model. And that’s not all! The maximum weight capacity has increased from 400 kg to 500 kg by expanding the travel distance between open and closed positions (working rod stroke) while maintaining the exact same outer dimensions as its predecessor!

2. 📐 The front mounting bracket has been redesigned and improved, providing smoother operator travel in both manual and automatic modes.

3. 😎 The updated high-tech design retains its classic aesthetic—a trademark of BFT swing gate automation in the KUSTOS and PHOBOS product lines.

4. 🔐 Added the ability to install optional AMIP mechanical stops mounted directly on the motor housing, which additionally secure the gate leaves in the open or closed position and reduce wind load on the gear motor.

An exclusive manufacturer solution—the proprietary BFT Easy Set app—is a visualization calculator designed for precise calculation of BFT swing automation installation geometry. We recommend using this free installer assistant, available for download on Android and iOS app stores.

The ZARA BT A80 control board features the following technologies and functions:

1. DIP switches and trimmers (adjustable potentiometers) interface for configuring parameters and control board functions.

2. U-Security — new encryption technology to protect remote control codes from cloning. Maximum security for your driveway! For shared or communal use, it serves as an extra guarantee against unauthorized entry.

3. Verde — new energy-saving technology, consuming only 0.5W in standby mode.

4. Expanded memory module capacity — increased from 63 to 128 users. Furthermore, it is now removable, allowing saved remotes to be backed up and transferred if the control board is damaged.

5. U-Link 2.0 — now equipped with an expansion port to connect both new and previous-generation smart expansion cards. This enables remote automation management and setting adjustments right from your smartphone, wherever you are.

6. Additional input/output expansion slot for connecting the programmable EBT expansion board — enables the connection of a second pair of photocells, increases input/output terminals for broader control scenarios, and allows connection of the EBP BT A 24V electric lock (functionality missing in the previous ZARA BTL2 board).

7. D-Track — patented technology for automatic drive force adjustment and obstacle detection, offering an additional safety layer against impacts or pinching vehicles, people, or pets.

8. Supports connection of the BBT BAT CBOX FLAT battery backup module, ensuring gate operation even during a 230V power outage.

9. Automatic closing function based on timer settings or after passing through photocells.

10. Command lockout function during the gate opening phase (ideal for safe shared/communal use).

Kit Contents

• PHOBOS BT B25 24V linear operator with magnetic limit switches — 2 pcs.

• ZARA BT A80 controller in housing with built-in 2-channel receiver (up to 128 remotes capacity), DIP switches — 1 pc.

• MITTO COOL C4 4-channel remote control, U-Security, 3V, 433.92 MHz — 2 pcs.

PHOBOS BT B40 KIT swing gate automation kit for gates with a leaf weight up to 700 kg and length up to 4 m, equipped with the ZARA BT A80 control board with DIP switches.

Unlike the shorter Phobos BT B25 version, this model is more versatile for installation, suitable for both classic inward and outward opening thanks to an extended 480 mm rod stroke.

For installing the Phobos BT B40 with outward opening, it is recommended to immediately purchase the SFR B L rear bracket extensions (2 pcs — one for each operator); otherwise, you will need to extend the bracket using makeshift materials. Alternatively, you can complete your order with this original manufacturer accessory right away.

⚠️ Warning! If the leaf length exceeds 3 meters, installing an EBP BT A 24V vertical electric lock is mandatory to reduce wind load and provide additional locking in the closed position.

This is the updated 2024 model, replacing the PHOBOS BT A40 → now PHOBOS BT B40.

What’s new?

1. 🧲 Magnetic limit switches have been moved to the top of the housing for easier setup during installation. BFT's patented reverse haptic feedback (vibration) technology 📳 for limit switch triggering has been added, making the installation process even simpler.

This increased the operator's rod stroke from 400 mm to 480 mm, allowing gate leaves to open up to 130° instead of the 124° offered by the previous model. And that’s not all! The maximum weight capacity has increased from 500 kg to 700 kg by expanding the travel distance between open and closed positions (working rod stroke) while maintaining the exact same outer dimensions as its predecessor! 2. 📐 The front mounting bracket has been redesigned and improved, providing smoother operator travel in both manual and automatic modes. 3. 😎 The updated high-tech design retains its classic aesthetic—a trademark of BFT swing gate automation in the KUSTOS and PHOBOS product lines. 4. 🔐 Added the ability to install optional AMIP mechanical stops mounted directly on the motor housing, which additionally secure the gate leaves in the open or closed position and reduce wind load on the gear motor.

The new model is fully compatible with the previous version in terms of dimensions and supports operation with both previous and new control boards: ZARA BT A80 or THALIA BT A80 DUO.

An exclusive manufacturer solution—the proprietary BFT Easy Set app—is a visualization calculator designed for precise calculation of BFT swing automation installation geometry. We recommend using this free installer assistant, available for download on Android and iOS app stores.

The ZARA BT A80 control board features the following technologies and functions:

1. DIP switches and trimmers (adjustable potentiometers) interface for configuring parameters and control board functions.

2. U-Security — new encryption technology to protect remote control codes from cloning. Maximum security for your driveway! For shared or communal use, it serves as an extra guarantee against unauthorized entry.

3. Verde — new energy-saving technology, consuming only 0.5W in standby mode.

4. Expanded memory module capacity — increased from 63 to 128 users. Furthermore, it is now removable, allowing saved remotes to be backed up and transferred if the control board is damaged.

5. U-Link 2.0 — now equipped with an expansion port to connect both new and previous-generation smart expansion cards. This enables remote automation management and setting adjustments right from your smartphone, wherever you are.

6. Additional input/output expansion slot for connecting the programmable EBT expansion board — enables the connection of a second pair of photocells, increases input/output terminals for broader control scenarios, and allows connection of the EBP BT A 24V electric lock (functionality missing in the previous ZARA BTL2 board).

7. D-Track — patented technology for automatic drive force adjustment and obstacle detection, offering an additional safety layer against impacts or pinching vehicles, people, or pets.

8. Supports connection of the BBT BAT CBOX FLAT battery backup module, ensuring gate operation even during a 230V power outage.

9. Automatic closing function based on timer settings or after passing through photocells.

10. Command lockout function during the gate opening phase (ideal for safe shared/communal use).

Kit Contents

• PHOBOS BT B40 24V linear operator with magnetic limit switches — 2 pcs.

• ZARA BT A80 controller in housing with built-in 2-channel receiver (up to 128 remotes capacity), DIP switches — 1 pc.

• MITTO COOL C4 4-channel remote control, U-Security, 3V, 433.92 MHz — 2 pcs.

PHOBOS BT B25 KIT swing gate automation kit for gates with a leaf weight up to 500 kg and length up to 3 m, equipped with the ZARA BT A80 control board with DIP switches.

Non-reversible, linear operator with a 330 mm rod stroke.

Recommended for standard inward-opening installations.

⚠️ Warning! If the leaf length exceeds 2 meters, installing an EBP BT A 24V vertical electric lock is mandatory to reduce wind load and provide additional locking in the closed position.

This is the updated 2024 model, replacing the PHOBOS BT A25 → now PHOBOS BT B25.

What’s new?

1. 🧲 Magnetic limit switches have been moved to the top of the housing for easier setup during installation. BFT's patented reverse haptic feedback (vibration) technology 📳 for limit switch triggering has been added, making the installation process even simpler.

   This increased the operator's rod stroke from 290 mm to 330 mm, allowing gate leaves to open up to 120° instead of the 116° offered by the previous model. And that’s not all! The maximum weight capacity has increased from 400 kg to 500 kg by expanding the travel distance between open and closed positions (working rod stroke) while maintaining the exact same outer dimensions as its predecessor!

2. 📐 The front mounting bracket has been redesigned and improved, providing smoother operator travel in both manual and automatic modes.

3. 😎 The updated high-tech design retains its classic aesthetic—a trademark of BFT swing gate automation in the KUSTOS and PHOBOS product lines.

4. 🔐 Added the ability to install optional AMIP mechanical stops mounted directly on the motor housing, which additionally secure the gate leaves in the open or closed position and reduce wind load on the gear motor.

An exclusive manufacturer solution—the proprietary BFT Easy Set app—is a visualization calculator designed for precise calculation of BFT swing automation installation geometry. We recommend using this free installer assistant, available for download on Android and iOS app stores.

The ZARA BT A80 control board features the following technologies and functions:

1. DIP switches and trimmers (adjustable potentiometers) interface for configuring parameters and control board functions.

2. U-Security — new encryption technology to protect remote control codes from cloning. Maximum security for your driveway! For shared or communal use, it serves as an extra guarantee against unauthorized entry.

3. Verde — new energy-saving technology, consuming only 0.5W in standby mode.

4. Expanded memory module capacity — increased from 63 to 128 users. Furthermore, it is now removable, allowing saved remotes to be backed up and transferred if the control board is damaged.

5. U-Link 2.0 — now equipped with an expansion port to connect both new and previous-generation smart expansion cards. This enables remote automation management and setting adjustments right from your smartphone, wherever you are.

6. Additional input/output expansion slot for connecting the programmable EBT expansion board — enables the connection of a second pair of photocells, increases input/output terminals for broader control scenarios, and allows connection of the EBP BT A 24V electric lock (functionality missing in the previous ZARA BTL2 board).

7. D-Track — patented technology for automatic drive force adjustment and obstacle detection, offering an additional safety layer against impacts or pinching vehicles, people, or pets.

8. Supports connection of the BBT BAT CBOX FLAT battery backup module, ensuring gate operation even during a 230V power outage.

9. Automatic closing function based on timer settings or after passing through photocells.

10. Command lockout function during the gate opening phase (ideal for safe shared/communal use).

Kit Contents

• PHOBOS BT B25 24V linear operator with magnetic limit switches — 2 pcs.

• ZARA BT A80 controller in housing with built-in 2-channel receiver (up to 128 remotes capacity), DIP switches — 1 pc.

• MITTO COOL C4 4-channel remote control, U-Security, 3V, 433.92 MHz — 2 pcs.

PHOBOS BT B40 SMART KIT INT swing gate automation kit for gates with a leaf weight up to 700 kg and length up to 4 m, equipped with the ZARA BT A80 control board with DIP switches.

Unlike the shorter Phobos BT B25 version, this model is more versatile for installation, suitable for both classic inward and outward opening thanks to an extended 480 mm rod stroke.

For installing the Phobos BT B40 with outward opening, it is recommended to immediately purchase the SFR B L rear bracket extensions (2 pcs — one for each operator); otherwise, you will need to extend the bracket using makeshift materials. Alternatively, you can complete your order with this original manufacturer accessory right away.

⚠️ Warning! If the leaf length exceeds 3 meters, installing an EBP BT A 24V vertical electric lock is mandatory to reduce wind load and provide additional locking in the closed position.

This is the updated 2024 model, replacing the PHOBOS BT A40 → now PHOBOS BT B40 SMART KIT INT.

What’s new?

1. 🧲 Magnetic limit switches have been moved to the top of the housing for easier setup during installation. BFT's patented reverse haptic feedback (vibration) technology 📳 for limit switch triggering has been added, making the installation process even simpler.

This increased the operator's rod stroke from 400 mm to 480 mm, allowing gate leaves to open up to 130° instead of the 124° offered by the previous model. And that’s not all! The maximum weight capacity has increased from 500 kg to 700 kg by expanding the travel distance between open and closed positions (working rod stroke) while maintaining the exact same outer dimensions as its predecessor! 2. 📐 The front mounting bracket has been redesigned and improved, providing smoother operator travel in both manual and automatic modes. 3. 😎 The updated high-tech design retains its classic aesthetic—a trademark of BFT swing gate automation in the KUSTOS and PHOBOS product lines. 4. 🔐 Added the ability to install optional AMIP mechanical stops mounted directly on the motor housing, which additionally secure the gate leaves in the open or closed position and reduce wind load on the gear motor.

The new model is fully compatible with the previous version in terms of dimensions and supports operation with both previous and new control boards: ZARA BT A80 or THALIA BT A80 DUO.

An exclusive manufacturer solution—the proprietary BFT Easy Set app—is a visualization calculator designed for precise calculation of BFT swing automation installation geometry. We recommend using this free installer assistant, available for download on Android and iOS app stores.

The ZARA BT A80 control board features the following technologies and functions:

1. DIP switches and trimmers (adjustable potentiometers) interface for configuring parameters and control board functions.

2. U-Security — new encryption technology to protect remote control codes from cloning. Maximum security for your driveway! For shared or communal use, it serves as an extra guarantee against unauthorized entry.

3. Verde — new energy-saving technology, consuming only 0.5W in standby mode.

4. Expanded memory module capacity — increased from 63 to 128 users. Furthermore, it is now removable, allowing saved remotes to be backed up and transferred if the control board is damaged.

5. U-Link 2.0 — now equipped with an expansion port to connect both new and previous-generation smart expansion cards. This enables remote automation management and setting adjustments right from your smartphone, wherever you are.

6. Additional input/output expansion slot for connecting the programmable EBT expansion board — enables the connection of a second pair of photocells, increases input/output terminals for broader control scenarios, and allows connection of the EBP BT A 24V electric lock (functionality missing in the previous ZARA BTL2 board).

7. D-Track — patented technology for automatic drive force adjustment and obstacle detection, offering an additional safety layer against impacts or pinching vehicles, people, or pets.

8. Supports connection of the BBT BAT CBOX FLAT battery backup module, ensuring gate operation even during a 230V power outage.

9. Automatic closing function based on timer settings or after passing through photocells.

10. Command lockout function during the gate opening phase (ideal for safe shared/communal use).

Kit Contents

• PHOBOS BT B40 SMART KIT INT 24V linear operator with magnetic limit switches — 2 pcs.

• ZARA BT A80 controller in housing with built-in 2-channel receiver (up to 128 remotes capacity), DIP switches — 1 pc.

• MITTO COOL C4 4-channel remote control, U-Security, 3V, 433.92 MHz — 2 pcs.

KUSTOS BT B25 SMART KIT INT swing gate automation kit for gates with a leaf weight up to 400 kg and length up to 3 m, equipped with the ZARA BT A80 control board with DIP switches.

Recommended for classic inward opening installations. Working rod stroke: 270 mm (including the included additional AMIP open position mechanical stop; if you unscrew the mechanical stop from the housing, the rod stroke increases to 295 mm).

⚠️ Warning! If the leaf length exceeds 2 meters, installing an EBP BT A 24V vertical electric lock is mandatory to reduce wind load and provide additional locking in the closed position.

What’s new?

1. 🧲 Magnetic limit switches have been moved to the top of the housing for easier setup during installation. BFT's patented reverse haptic feedback (vibration) technology 📳 for limit switch triggering has been added, making the installation process even simpler.

The overall dimensions remain the same as its predecessor, making the new model fully interchangeable with the KUSTOS BT A25! 2. 😎 The updated high-tech design retains its classic aesthetic—a trademark of BFT swing gate automation in the KUSTOS and PHOBOS product lines. 3. 🔐 Added an optional AMIP mechanical stop mounted to the lower part of the motor housing, which additionally secures the gate leaf in the open position and reduces wind load on the gear motor.

• Irreversible, telescopic type, with a housing that completely protects the drive shaft from external elements.

• Magnetic limit switches for closed and open positions are also enclosed under the upper cover of the operator housing.

• Thanks to 24V technology, this swing gate automation is suitable for intensive use, including shared driveways or industrial applications.

• Features a slowdown function at the end of the cycle for smooth closing or opening of the gate.

• Excellent speed characteristics: opens a gate leaf to a 90° angle in 12 seconds (including slowdown).

• Maximum opening angle: 119°.

• Optionally, you can connect a ready-made proprietary BBT BAT CBOX FLAT emergency power backup module to open the gate even during a 230V mains power outage.

• Features a striking high-tech design with an anodized aluminum housing.

An exclusive manufacturer solution—the proprietary BFT Easy Set app—is a visualization calculator designed for precise calculation of BFT swing automation installation geometry. We recommend using this free installer assistant, available for download on Android and iOS app stores.

The ZARA BT A80 control board features the following technologies and functions:

1. DIP switches and trimmers (adjustable potentiometers) interface for configuring parameters and control board functions.

2. U-Security — new encryption technology to protect remote control codes from cloning. Maximum security for your driveway! For shared or communal use, it serves as an extra guarantee against unauthorized entry.

3. Verde — new energy-saving technology, consuming only 0.5W in standby mode.

4. Expanded memory module capacity — increased from 63 to 128 users. Furthermore, it is now removable, allowing saved remotes to be backed up and transferred if the control board is damaged.

5. U-Link 2.0 — now equipped with an expansion port to connect both new and previous-generation smart expansion cards. This enables remote automation management and setting adjustments right from your smartphone, wherever you are.

6. Additional input/output expansion slot for connecting the programmable EBT expansion board — enables the connection of a second pair of photocells, increases input/output terminals for broader control scenarios, and allows connection of the EBP BT A 24V electric lock (functionality missing in the previous ZARA BTL2 board).

7. D-Track — patented technology for automatic drive force adjustment and obstacle detection, offering an additional safety layer against impacts or pinching vehicles, people, or pets.

8. Supports connection of the BBT BAT CBOX FLAT battery backup module, ensuring gate operation even during a 230V power outage.

9. Automatic closing function based on timer settings or after passing through photocells.

10. Command lockout function during the gate opening phase (ideal for safe shared/communal use).

Kit Contents

• KUSTOS BT B25 24V telescopic operator with magnetic limit switches — 2 pcs.

• ZARA BT A80 controller in housing with built-in 2-channel receiver (up to 128 remotes capacity), DIP switches — 1 pc.

• MITTO COOL C4 4-channel remote control, U-Security, 3V, 433.92 MHz — 2 pcs.

The BFT KUSTOS BT B40 KIT automation set is an electromechanical system with 24 V telescopic drives for swing gates weighing up to 700 kg and leaf lengths up to 4 m. A reliable solution for intensive use and large structures.

The KUSTOS BT B40 KIT is equipped with top-mounted telescopic drives with magnetic limit switches, ensuring precise positioning and simplifying installation. The rod stroke is up to 330 mm (expandable up to 355 mm), and an opening angle of up to 124° allows adapting the system to various installation conditions. 24 V technology guarantees stable operation under high intensity. The ZARA BT A80 control board in a protective enclosure supports setup via DIP switches and trimmers, provides memory for up to 128 users, and implements signal protection via U-Security technology. The system utilizes the VERDE energy-saving mode, supports integration via U-Link, and allows connecting additional safety devices. It features soft start and slowdown to reduce mechanical stress, as well as support for BBT BAT CBOX FLAT backup battery connection. An electric lock is recommended for gate leaves over 3 m.

Key Advantages

• Telescopic drives for versatile installation

• Powerful system for gates up to 700 kg

• Magnetic limit switches for high positioning accuracy

• Soft start and deceleration

• Support for up to 128 users

• U-Security signal encryption

• Integration via U-Link

• Compatibility with safety accessories

Ideal For

• Owners of large swing gates

• Residential complexes

• Commercial properties

• High-traffic facilities

Kit Contents

• KUSTOS BT B40 electric drives — 2 pcs

• ZARA BT A80 control unit in enclosure — 1 pc

• Built-in 2-channel receiver (up to 128 transmitters) — 1 pc

• MITTO COOL C4 remote controls — 2 pcs

KUSTOS BT B25 swing gate automation kit for gates with a leaf weight up to 400 kg and length up to 3 m, equipped with the ZARA BT A80 control board with DIP switches.

Recommended for classic inward opening installations. Working rod stroke: 270 mm (including the included additional AMIP open position mechanical stop; if you unscrew the mechanical stop from the housing, the rod stroke increases to 295 mm).

⚠️ Warning! If the leaf length exceeds 2 meters, installing an EBP BT A 24V vertical electric lock is mandatory to reduce wind load and provide additional locking in the closed position.

What’s new?

1. 🧲 Magnetic limit switches have been moved to the top of the housing for easier setup during installation. BFT's patented reverse haptic feedback (vibration) technology 📳 for limit switch triggering has been added, making the installation process even simpler.

The overall dimensions remain the same as its predecessor, making the new model fully interchangeable with the KUSTOS BT A25! 2. 😎 The updated high-tech design retains its classic aesthetic—a trademark of BFT swing gate automation in the KUSTOS and PHOBOS product lines. 3. 🔐 Added an optional AMIP mechanical stop mounted to the lower part of the motor housing, which additionally secures the gate leaf in the open position and reduces wind load on the gear motor.

• Irreversible, telescopic type, with a housing that completely protects the drive shaft from external elements.

• Magnetic limit switches for closed and open positions are also enclosed under the upper cover of the operator housing.

• Thanks to 24V technology, this swing gate automation is suitable for intensive use, including shared driveways or industrial applications.

• Features a slowdown function at the end of the cycle for smooth closing or opening of the gate.

• Excellent speed characteristics: opens a gate leaf to a 90° angle in 12 seconds (including slowdown).

• Maximum opening angle: 119°.

• Optionally, you can connect a ready-made proprietary BBT BAT CBOX FLAT emergency power backup module to open the gate even during a 230V mains power outage.

• Features a striking high-tech design with an anodized aluminum housing.

An exclusive manufacturer solution—the proprietary BFT Easy Set app—is a visualization calculator designed for precise calculation of BFT swing automation installation geometry. We recommend using this free installer assistant, available for download on Android and iOS app stores.

The ZARA BT A80 control board features the following technologies and functions:

1. DIP switches and trimmers (adjustable potentiometers) interface for configuring parameters and control board functions.

2. U-Security — new encryption technology to protect remote control codes from cloning. Maximum security for your driveway! For shared or communal use, it serves as an extra guarantee against unauthorized entry.

3. Verde — new energy-saving technology, consuming only 0.5W in standby mode.

4. Expanded memory module capacity — increased from 63 to 128 users. Furthermore, it is now removable, allowing saved remotes to be backed up and transferred if the control board is damaged.

5. U-Link 2.0 — now equipped with an expansion port to connect both new and previous-generation smart expansion cards. This enables remote automation management and setting adjustments right from your smartphone, wherever you are.

6. Additional input/output expansion slot for connecting the programmable EBT expansion board — enables the connection of a second pair of photocells, increases input/output terminals for broader control scenarios, and allows connection of the EBP BT A 24V electric lock (functionality missing in the previous ZARA BTL2 board).

7. D-Track — patented technology for automatic drive force adjustment and obstacle detection, offering an additional safety layer against impacts or pinching vehicles, people, or pets.

8. Supports connection of the BBT BAT CBOX FLAT battery backup module, ensuring gate operation even during a 230V power outage.

9. Automatic closing function based on timer settings or after passing through photocells.

10. Command lockout function during the gate opening phase (ideal for safe shared/communal use).

Kit Contents

• KUSTOS BT B25 24V telescopic operator with magnetic limit switches — 2 pcs.

• ZARA BT A80 controller in housing with built-in 2-channel receiver (up to 128 remotes capacity), DIP switches — 1 pc.

• MITTO COOL C4 4-channel remote control, U-Security, 3V, 433.92 MHz — 2 pcs.

The BFT KUSTOS BT B40 KIT automation set is an electromechanical system with 24 V telescopic drives for swing gates weighing up to 700 kg and leaf lengths up to 4 m. A reliable solution for intensive use and large structures.

The KUSTOS BT B40 KIT is equipped with top-mounted telescopic drives with magnetic limit switches, ensuring precise positioning and simplifying installation. The rod stroke is up to 330 mm (expandable up to 355 mm), and an opening angle of up to 124° allows adapting the system to various installation conditions. 24 V technology guarantees stable operation under high intensity. The ZARA BT A80 control board in a protective enclosure supports setup via DIP switches and trimmers, provides memory for up to 128 users, and implements signal protection via U-Security technology. The system utilizes the VERDE energy-saving mode, supports integration via U-Link, and allows connecting additional safety devices. It features soft start and slowdown to reduce mechanical stress, as well as support for BBT BAT CBOX FLAT backup battery connection. An electric lock is recommended for gate leaves over 3 m.

Key Advantages

• Telescopic drives for versatile installation

• Powerful system for gates up to 700 kg

• Magnetic limit switches for high positioning accuracy

• Soft start and deceleration

• Support for up to 128 users

• U-Security signal encryption

• Integration via U-Link

• Compatibility with safety accessories

Ideal For

• Owners of large swing gates

• Residential complexes

• Commercial properties

• High-traffic facilities

Kit Contents

• KUSTOS BT B40 electric drives — 2 pcs

• ZARA BT A80 control unit in enclosure — 1 pc

• Built-in 2-channel receiver (up to 128 transmitters) — 1 pc

• MITTO COOL C4 remote controls — 2 pcs

The BFT ATHOS AC A25 EURO KIT automation set is an electromechanical system for swing gates with a leaf weight of up to 700 kg and a length of up to 2.5 m. A ready-made gate automation solution with a complete set of required components.

The ATHOS AC A25 EURO KIT model ensures stable and reliable gate operation thanks to proven electromechanics and the modern Alena control unit. The system supports automatic closing and a "pedestrian mode" for partial opening. The built-in two-channel radio receiver enables remote gate control and supports up to 63 users. Remote controls are programmed over the air via radio channel, making setup straightforward. A fast-closing function after clearing the photocells is provided to enhance safety. In case of power outage, manual key release is available. The system also blocks the "Start" command during the opening phase to ensure proper operation.

Key Features & Advantages

• Complete swing gate automation kit

• Handles gate leaves up to 700 kg

• Pedestrian mode (partial opening)

• Automatic gate closing

• Remote control programming via radio channel

• Fast closing after clearing photocells

• Manual key release during power outages

• Supports up to 63 users

Target Audience / Suitable For

• Private homeowners

• Commercial properties

• Owners of medium-sized swing gates

• Anyone looking for a reliable automation kit

Kit Contents

• Athos AC A25 electric operators — 2 pcs

• Alena control unit — 1 pc

• Built-in 2-channel receiver (up to 63 remotes) — 1 pc

• 4-channel remote controls — 2 pcs

• Compacta A20-180 photocells — 1 pair

The BFT ATHOS AC A40 EURO KIT automation set is an electromechanical system for swing gates with a leaf weight of up to 800 kg, featuring a built-in control unit. A ready-made gate automation solution with an increased power reserve.

The ATHOS AC A40 EURO KIT model ensures stable and efficient operation even under heavy loads. The system supports automatic closing and a "pedestrian mode" for partial opening. The built-in two-channel radio receiver enables remote gate control and supports up to 63 users. Remote controls are programmed over the air via radio channel, simplifying setup. A fast-closing function after clearing the photocells enhances operational safety. In case of power outage, manual key release is available. The system also blocks the "Start" command during the opening phase to ensure proper operation.

Key Features & Advantages

• Handles gate leaves up to 800 kg

• Complete gate automation kit

• Pedestrian mode (partial opening)

• Automatic gate closing

• Remote control programming via radio channel

• Fast closing after clearing photocells

• Manual key release during power outages

• Supports up to 63 users

Target Audience / Suitable For

• Private homeowners

• Commercial properties

• Owners of heavy-duty swing gates

• Anyone looking for a reliable automation kit

Kit Contents

• Athos AC A40 electric operators — 2 pcs

• Alena control unit — 1 pc

• Built-in 2-channel receiver (up to 63 remotes) — 1 pc

• Compacta A20-180 photocells — 1 pair

• 4-channel remote controls — 2 pcs

Electromechanical operator ATHOS AC A25 for swing (double-leaf) gates with a leaf weight of up to 700 kg and a leaf length of up to 2.5 m.

Recommended for classic inward opening installation. Stroke length: 300 mm.

Can be mounted on wide pillars with a depth of up to 165 mm from the edge of the pillar to the hinge (pivot axis). Maximum gate opening angle up to 110°.

⚠️ A central mechanical stop is strictly required to set the limit position for closed gates. Lateral stops for the open position are not required, as the telescopic drive completely retracts and stops internally (only in the case of classic inward opening).

⚠️ If the gate leaf exceeds 2.0 m in length, an EBP AC A 230V vertical electric lock must be installed to additionally secure the gate in the closed position and relieve wind load.

The ALENA SW2 (230V) control board in a CPEM box controls, by default, two operators (classic double-leaf gates) or one operator (single-leaf gates) — to set single-leaf mode, turn the T4 trimmer fully counterclockwise and save the new settings by holding the S2 button on the board for 5 seconds.

• Automatic timed closing function

• Remote control programming function within receiver range (DIP 1 – ON)

• Pedestrian mode function implemented via the 2nd receiver channel (programmed to the second remote button via S2)

• Manual release via triangular key in case of 230V power outage

• Fast-closing function after clearing the photocells (after 3 seconds)

• "Start" command block during the opening phase (ideal for collective/condominium use)

A unique development by the manufacturer — the proprietary BFT Easy Set app is a visualization calculator for precise installation geometry calculation of BFT swing gate automation. We recommend using this free installer assistant, available for download on Android and iOS app stores.

Kit Contents

• ATHOS AC A25 (230V) L (left) and ATHOS AC A25 (230V) R (right) operators — 2 pcs

• ALENA SW2 (230V) controller in CPEM box, with built-in 2-channel receiver (up to 63 remotes memory), DIP switches — 1 pc

• MITTO COOL C4 4-channel remote control, U-Security, 3V, 433.92 MHz — 2 pcs

• COMPACTA A20-180 photocells with swiveling lens, 12–33V AC/DC — 1 pair

• RADIUS LED AC A R0 230V yellow flashing light without antenna — 1 pc

BFT TIZIANO B GDA 260 S01 Garage Door Motor UAE is a compact Italian-engineered automatic operator for sectional garage doors in villas, private residences and compatible light commercial applications.

Designed for garage doors up to 60 KG and surface areas up to 10 m², it combines a 24V motor, VENERE B GDA control unit and 6.6 m/min opening speed for convenient everyday access.

Its encoder limit-switch system works with BFT D-Track force management to provide accurate door positioning and intelligent impact reaction, while slowdown and mechanical locking support smooth and secure operation.

The anti-break-in rail-carriage concept helps keep the garage door locked in the closed position after emergency manual closing, making this model suitable for residential garage automation throughout the UAE.

Applications

• Residential sectional garage doors
• Villa garage automation
• Private home garages
• Automatic garage access systems
• Light-duty sectional overhead doors
• Residential compounds

Two-piece chain drive rail with a total length of 3020 mm, designed for BFT TIZIANO B GDA ceiling-mounted garage door operators. Provides smooth, durable, and reliable transmission for sectional garage doors.

Key Features & Advantages

• Split Design (Two-Piece): Composed of two 1510 mm sections for convenient transportation and easy assembly on-site.

• Durable Chain Transmission: Heavy-duty steel chain ensures precise movement, high wear resistance, and long-term operating life.

• Optimized Travel Distance: Offers a maximum effective stroke of up to 2560 mm.

• OEM Compatibility: Seamlessly integrates with BFT TIZIANO B GDA series automation systems.

Package Contents

• Split chain drive rail (2 sections × 1510 mm) — 1 pc

• Mounting hardware and chain assembly elements

Two-piece chain drive rail with a total length of 3620 mm, engineered specifically for BFT TIZIANO B GDA ceiling-mounted garage door operators. Designed to handle taller sectional doors, offering smooth, robust, and reliable power transmission.

Key Features & Advantages

• Extended Length for Higher Doors: Total length of 3620 mm provides an increased effective stroke for taller garage door openings.

• Two-Piece Split Design: Consists of two 1810 mm steel sections, making transportation, handling, and installation significantly easier.

• Heavy-Duty Steel Chain: Features a high-tensile chain mechanism for superior wear resistance, consistent tension, and long-term operating durability.

• OEM Compatibility: Fully compatible with BFT TIZIANO 3620 garage door automation systems.

Package Contents

• Two-piece chain drive rail (2 sections × 1810 mm) — 1 pc

• Chain assembly kit and standard mounting hardware

One-piece monoblock belt drive rail with a total length of 3020 mm, designed for BFT TIZIANO B GDA ceiling-mounted sectional garage door operators. Engineered with a high-durability Kevlar-reinforced belt to provide exceptionally quiet, smooth, and low-maintenance door operation.

Key Features & Advantages

• Monoblock (One-Piece) Construction: Solid, non-split rail design provides maximum rigidity, structural integrity, and smooth carriage movement along the entire length.

• Ultra-Quiet Operation: Reinforced rubber belt drive significantly reduces operational noise and vibration compared to traditional chain rails, making it ideal for garages attached to living spaces.

• Maintenance-Free Belt: Requires no lubrication or grease, keeping your vehicle and garage environment clean.

• OEM Compatibility: Designed for seamless integration with BFT TIZIANO B GDA series garage door openers.

Package Contents

• One-piece belt drive rail (3020 mm) — 1 pc

• Mounting brackets and carriage assembly kit